How to Take Off Security Tag on Shoes?

This post may contain affiliate links. If you click one, I may earn a commission at no cost to you. As an Amazon Associate, I earn from qualifying purchases.

It can be very frustrating to purchase a new pair of shoes, only to find that they are still attached to a security tag. In most cases, you will need to remove the security tag before you can wear the shoes.

However, this can sometimes be difficult, as the tags are often tightly attached. In this article, we will show you how to take off a security tag from a shoe, without damaging the shoe.

Why a Security Tag Is Placed on Shoes?

A security tag is a device that is used to deter theft and loss of merchandise. Retailers use security tags on items that are high in value or are frequently stolen. The tags are attached to the merchandise with a strong adhesive and are difficult to remove without damage to the item. The tags set off an alarm if they are removed from the store without being deactivated by a store employee.

Security tags are placed on shoes for several reasons. Shoes are one of the most commonly stolen items in retail stores. They are also one of the most expensive items that a store sells. By placing a security tag on shoes, retailers can deter thieves and help to prevent loss.

The security tags are placed on the shoes at the time of purchase. The tags can be deactivated at the time of purchase or when the shoes are returned to the store. If the tags are not deactivated, they will set off an alarm when the shoes are removed from the store.

How Do You Remove a Security Tag From a Shoe?

Are you tired of those pesky security tags getting in the way of your new shoes? Well, fear not! Here is a detailed guide on how to take off security tags on shoes so you can enjoy your purchase without any hassle.

What You’ll Need:

  • A pair of pliers
  • A sharp knife
  • A bowl of warm water

Step 1:

Start by using the pliers to remove the hard plastic tag from the shoe. This can be a bit tricky, so be patient and take your time.

Step 2:

Once the tag is removed, use the knife to cut through the thin wire that is attached to the shoe.

Step 3:

Now, it’s time to soak the shoe in the warm water. This will help to loosen the adhesive that is holding the security tag to the shoe.

Step 4:

After a few minutes, use the knife to gently scrape the tag off of the shoe. You may need to repeat this step a few times to get all of the adhesive off.

Step 5:

And that’s it! Your shoe is now tag-free and ready to wear. Enjoy!

What Is the Best Way to Take Off a Security Tag From a Shoe?

Removing a security tag from a shoe (or any other article of clothing) can be a tricky proposition, as you don’t want to damage the item. But with a little care and patience, it is possible to remove a security tag without causing any damage.

The first step is to locate the small pin that is holding the security tag in place. This is usually located on the back of the tag. Once you have found the pin, gently pull on it until the tag pops free from the shoe.

If the pin is proving to be difficult to remove, you can try using a pair of needle-nose pliers to gently pull it out. Once the pin is out, the security tag should come right off.

If you are still having difficulty removing the tag, you can try using a can of compressed air to blow the tag off of the shoe. Just be careful not to aim the can directly at the shoe, as you don’t want to damage it.

With a little patience, you should be able to remove a security tag from a shoe without any damage. Just be careful not to damage the item in the process.


Security tags are a necessary evil for many retailers. But they can be a real pain for customers, especially when they’re trying to remove them from new shoes. With a little patience and care, however, it is possible to remove a security tag without damaging the shoe. Just be sure to follow the steps outlined in this article and you’ll be tag-free in no time. Thanks for reading!